Nano p1 sterile depth Series Click for Larger View

Call us TODAY at 727-847-4900 or
Toll Free at 800-761-4298

Request A Quote!

Nano P1 Series Sterile Air Depth Filters

flow capacity: 50 - 1150 scfm

The nano P1 range of sterile depth process filters are fabricated from polished 304 or 316 stainless steel for critical compressed air and gas applications in the high tech manufacturing, food processing, and beverage industries. This nano range encompasses ten models with connections from 1/4” to 3” and rated flows from 50 to 1150 scfm. Specifically designed for particulate and bacteria retention in sterile environments, these sterile filters are ideally suited for process applications such as food and beverage facilities with washdown requirements. The non-woven depth pleated polypropylene filter elements incorporate a positive double o-ring click-lock seal and are 100% integrity tested prior to shipment for reliable performance. With high efficiency and low pressure drop these sterile air depth filters provide efficient, cost effective performance for bio-burden reduction in compressed air or gas prior to incidental product contact. There is no better filter for your process filtration needs.

nano P1 stainless steel sterile air depth filters:
• validation documentation available on request
• not for use in air or gas streams containing water or oil
• all materials conform to 21CFR Part 177 of the US code of Federal Regulations and USP Class VI Biological test for plastics
• air flow from outside to inside

Model(s): PF 0050 SD-N, PF 0065 SD-N, PF 0085 SD-N, PF 0120 SD-N, PF 0170 SD-N, PF 0295 SD-N, PF 0460 SD-N, PF 0680 SD-N, PF 0850 SD-N, PF 1150 SD-N

*Scroll to the right on mobile to see entire chart
   Model
304 SS
filter
316 SS
filter
316 SS
tri-clamp
replacement
element
inlet & outlet
NPT(F)
rated flow1
scfm
Nm3/h
PF 0050 SD-N
E 102 SD
¼"
50
85
PF 0065 SD-N
  
E 102 SD
"
65
110
PF 0085 SD-N
E 102 SD
½"
85
144
PF 0120 SD-N
  
E 102 SD
¾"
120
204
PF 0170 SD-N
E 105 SD
1"
170
289
PF 0295 SD-N
  
E 105 SD
1½"
295
501
PF 0460 SD-N
E 110 SD
2"
460
782
PF 0680 SD-N
  
E 120 SD
2"
680
1156
PF 0850 SD-N
E 120 SD
2½"
850
1444
PF 1150 SD-N
E 130 SD
3"
1150
1954
(1) at 100 psig. For all other pressures, refer to the pressure correction factor table
(3) at 30 psia for 20 minutes. Applies to element only
(4) hydrophobic graded porosity non-woven pleated depth


➤Click Here for Correction Factors

*Scroll to the right on mobile to see entire chart
   Specifications
standard
optional
design operating pressure range
0 to 232 psig
-
inlet & outlet connections
NPT(F)
tri-clamp sanitary
drain & vent connections
¼" BSPP
-
filter housing material
1.4301 quality
304 stainless steel
1.4404 quality
316L stainless steel
filter housing polishing
passivated & polished to
grade Ra <1.6um
-
filter housing seals
aseptic EPDM
consult mdi
Element Performance
SD
particle removal (at 100% pleated depth PP)
0.01 micron
continuous operating temperature range
35 to 120°F
maximum sterilizing temperature 3
257°F
media material
polypropylene 4
media support & endcap material
polypropylene
element to housing connection
positive click lock with dual silicone o-rings
(3) at 30 psia for 20 minutes. Applies to element only
(4) hydrophobic graded porosity non-woven pleated depth

No Options Available at This Time.




Nano p1 sterile depth Series Dimensions
*Scroll to the right on mobile to see entire chart
Model
A (in)
B2 (in)
C (in)
D (in)
Weight (lbs)
PF 0050 SD-N
9.45
4.14
2.76
2.24
4.2
PF 0065 SD-N
9.45
4.14
2.76
2.24
4.4
PF 0085 SD-N
9.45
4.25
2.76
2.24
4.6
PF 0120 SD-N
9.45
4.92
2.76
2.24
5.1
PF 0170 SD-N
11.40
4.92
3.35
2.78
7.3
PF 0295 SD-N
12.70
5.51
3.35
3.49
11.4
PF 0460 SD-N
19.02
6.70
4.10
3.64
12.1
PF 0680 SD-N
29.37
6.70
4.10
3.64
15.0
PF 0850 SD-N
29.53
7.17
4.10
3.80
15.2
PF 1150 SD-N
40.04
7.17
4.10
3.96
19.4