Nano S1 Series Click for Larger View

Call us TODAY at 727-835-0678 or
Toll Free at 800-761-4298

Request A Quote!

Nano S1 Series Condensate Treatment Systems
with Sepura STERLING technology

flow capacity: 60 - 7000 scfm

A typical compressed air and gas system can produce thousands of gallons of condensate per year. This condensate may be as much as 99.9% pure water - so why pay thousands of dollars per year to dispose of water when you can clean it simply and effectively and pour it down the drain? The nano Sepura range of oil water separators remove the oil from the water in your condensate so you can dispose of it cleanly and safely, drastically reducing your condensate disposal costs. Sepura is not your typical oil water separator. Its advanced design and unique environmentally friendly STERLING oil absorbing filtration media takes separation technology to a whole new level. No messy carbon bags. No settling tanks full of untreated condensate. No external oil collection containers. Just simple and effective condensate treatment.

nano Sepura oil water separators reliably give you:
• 100% performance - even on newer synthetic compressor lubricants
• lower life cycle costs - long media life and simplified oil water separator maintenance
• lower outlet concentrations - down to 5 ppmv or less
• space saving - smaller footprint for easier installation
• environmentally friendly recycled materials
• treatment for systems up to 10,000 scfm with a single unit
• peace of mind - the most reliable product of its kind
Model(s): SEP 60 ST, SEP 120 ST, SEP 360 ST, SEP 900 ST, SEP 1250 ST, SEP 1800 ST, SEP 2500 ST, SEP 3500 ST, SEP 7000 ST

*Scroll to the right on mobile to see entire chart
   Model
Inlet Connection(s)
 
Outlet Connection
 
Rated Flow2
Size
Type
Qty
Size
Type
Scfm
Nm3/h
SEP 60 ST
¼"
PTC1
1
 
"
PTC1
 
60
102
SEP 120 ST
½"
NPT
4
 
¾"
NPT
 
120
204
SEP 360 ST
½"
NPT
4
 
¾"
NPT
 
360
612
SEP 900 ST
½"
NPT
4
 
¾"
NPT
 
900
1529
SEP 1250 ST
½"
NPT
4
 
¾"
NPT
 
1250
2124
SEP 1800 ST
½"
NPT
8
 
¾"
NPT
 
1800
3058
SEP 2500 ST
½"
NPT
8
 
¾"
NPT
 
2500
4248
SEP 3500 ST
¾"
NPT
2
 
¾"
NPT
 
3500
5947
SEP 7000 ST
¾"
NPT
2
 
¾"
NPT
 
7000
11893
(1) push to connect
(2) sizing assumes an oil flooded compressor using mineral or synthetic lubricant with a maximum oil carry-over of 5 mg/m3 or less from the air compressor


*Scroll to the right on mobile to see entire chart
   Specifications SEP 60 ST SEP 120 to 2500 SEP 3500 SEP 7000
expected media life4 8000 hours @ 30 cfm
5000 hours @ 60 cfm
5000 hours 16000 hours @ 3500 cfm
8000 hours @ 5000 cfm
16000 hours @ 7000 cfm
8000 hours @ 10,000 cfm
maximum oil carry over < 20 ppm < 20 ppm < 20 ppm < 20 ppm
warranty 1 year 10 year 2 year 2 year
max condensate inlet pressure 232 psig 232 psig 232 psig 232 psig
inlet condensate temperature range 35 to 110°F 35 to 110°F 35 to 110°F 35 to 110°F
(3) media life decreases with increased condensate flow. For media life estimates at other flow rates contact mdi
(4) for use with PAG compressor lubricants contact mdi at 727-835-0678



Accessories
     ○ additional manifold - increases inlet connections from 4 to 8
         Fits SEP 120 to 900 ST Part no.: SEP 4 CK
     ○ yoke kit - converts two (2) SEP 900 ST into one (1) SEP 1800 ST
         Fits SEP 900 ST Part no.: SEP 1800 YK
     ○ yoke kit - converts two (2) SEP 1250 ST into one (1) SEP 2500 ST
         Fits SEP 1250 ST Part no.: SEP 2500 YK
Wall mounting kits
     ○ wall mounting kit for the SEP 120 ST
         Fits SEP 120 ST Part no.: 120 WMK
     ○ wall mounting kit for the SEP 360 ST
         Fits SEP 360 ST Part no.: 360 WMK
Replacement media kits
     ○ complete replacement separator with wall mounting bracket
         Fits SEP 60 ST Part no.: SEP 60 ST
     ○ (1) STERLING media bag, (1) pre filter bag & (1) retainer clip
         Fits SEP 120 ST Part no.: SEP 120 MRK
     ○ (1) STERLING media bag, (1) pre filter bag & (1) retainer clip
         Fits SEP 360 ST Part no.: SEP 360 MRK
     ○ (1) STERLING media bag, (1) pre filter bag & (2) retainer clips
         Fits SEP 900 ST Part no.: SEP 900 MRK
     ○ (2) STERLING media bag, (1) pre filter bag & (2) retainer clips
         Fits SEP 1250 ST Part no.: SEP 1250 MRK
     ○ (2) STERLING media bags, (2) pre filter bags & (4) retainer clips
         Fits SEP 1800 ST Part no.: SEP 1800 MRK
     ○ (4) STERLING media bags, (2) pre filter bags & (4) retainer clips
         Fits SEP 2500 ST Part no.: SEP 2500 MRK
     ○ replacement intermediate bulk container
         Fits SEP 3500 ST Part no.: SEP 3500 MRK
     ○ replacement intermediate bulk container
         Fits SEP 7000 ST Part no.: SEP 7000 MRK



Nano S1 Series Dimensions
*Scroll to the right on mobile to see entire chart
Model
A (in)
B (in)
C (in)
Weight (lbs)
SEP 60 ST
9.4"
5.5"
5.5"
2.9
SEP 120 ST
19.7"
8.5"
10.1"
6.0
SEP 900 ST
38.9"
17.0"
19.5"
32.6
SEP 1250 ST
38.9"
19.1"
19.5"
45.0
SEP 1800 ST
38.9"
38.9"
20.5"
69.0
SEP 2500 ST
38.9"
43.2"
21.5"
95.0
SEP 3500 ST
39.4"
39.4"
27.6"
319
SEP 7000 ST
39.4"
43.3"
43.3"
467