Nano F3 Series Filters Click for Larger View

Call us TODAY at 727-835-0678 or
Toll Free at 800-761-4298

Request A Quote!

Nano F3 Series
High Temperature Filters

flow capacity: 20 - 1,600 scfm

The nano F3 range of NHT high temperature compressed air filters are rated for temperatures up to 450°F. Manufactured from machined and die cast aluminum and polyester powder coated for optimum corrosion protection, the nano high temperature compressed air filters are designed for the unique demands of high temperature applications. These high temperature filters incorporate an innovative push-fit element design with dual o-ring seals to ensure optimum sealing and mechanical strength. Provided with a 1 micron dry particulate element these compressed air filters are ideal for high temperature applications including downstream of a heat reactivated desiccant air dryer. The custom engineered filter media is designed to handle the heat while providing high efficiency filtration with minimal pressure drop.

• Manufactured in an ISO 9001 approved facility and tested in accordance with ISO 12500.
• filters are intended for dry particulate filtration only

Model(s): NHT 0015 M1, NHT 0030 M1, NHT 0065 M1, NHT 0075 M1, NHT 0150 M1, NHT 0300 M1, NHT 0450 M1, NHT 0650 M1, NHT 1000 M1, NHT 1250 M1, NHT 1600 M1

*Scroll to the right on mobile to see entire chart
   Model
replacement
element
Inlet & Outlet
NPT
rated flow1
scfm
Nm3/h
NHT 0015 M1
EHT 0015 M1
¼"
15
26
NHT 0030 M1
EHT 0030 M1
⅜"
30
51
NHT 0065 M1
EHT 0065 M1
½"
65
111
NHT 0075 M1
EHT 0075 M1
¾"
75
128
NHT 0150 M1
EHT 0150 M1
1"
150
255
NHT 0300 M1
EHT 0300 M1
1½"
300
510
NHT 0450 M1
EHT 0450 M1
2"
450
765
NHT 0650 M1
EHT 0650 M1
2"
650
1105
NHT 1000 M1
EHT 1000 M1
3"
1000
1700
NHT 1250 M1
EHT 1250 M1
3"
1250
2125
NHT 1600 M1
EHT 1600 M1
3"
1600
2720
(1) at 100 psig. For all other pressures, refer to the pressure correction factor table

*Scroll to the right on mobile to see entire chart
   Specifications
design operating pressure range
0 to 150 psig
drain (included)
manual ball valve
filter housing material
machined & die cast aluminum

*Scroll to the right on mobile to see entire chart
   element performance
M1
particle removal
1 micron
design operating temperature range
35 to 450°F
pressure drop - clean
1.1 psid
pressure drop - recommended replacement 2
5.0 psid
flow direction through element
outside to inside
maximum element life
12 months or 8000 hours
end cap material
aluminum
(2) differential pressure indicator not included

➤Click Here for Correction Factors

There are no options available at this time.



Nano F3 High Temp Series Dimensions
*Scroll to the right on mobile to see entire chart
Model
A (in)
B (in)
C (in)
D (in)
Approx.
Weight (lbs)
NHT 0015 M1
2.5"
0.5"
6.0"
2.0"
0.5
NHT 0030 M1
2.5"
0.5"
7.5"
2.0"
0.6
NHT 0065 M1
4.5"
1.5"
12"
6.0"
5.7
NHT 0075 M1
4.5"
1.5"
12"
6.0"
5.7
NHT 0150 M1
4.5"
1.5"
15.5"
6.0"
7.3
NHT 0300 M1
5.75"
2.0"
21"
7.0"
16.5
NHT 0450 M1
5.75"
2.0"
21"
7.0"
16.5
NHT 0650 M1
5.75"
2.0"
25"
7.0"
22.0
NHT 1000 M1
9.0"
2.5"
27"
7.0"
32.0
NHT 1250 M1
9.0"
2.5"
32"
7.0"
33.5
NHT 1600 M1
9.0"
2.5"
38"
7.0"
33.5



 ✉ Email this Page