Nano D5 Series Blower Purge Air Dryer Click for Larger View

Call us TODAY at 727-847-4900 or
Toll Free at 800-761-4298

Request A Quote!

Nano D5 Series Blower Purge
Twin Tower Desiccant Air Dryers

500 - 10,000 scfm
The nano D5 blower purge desiccant air dryers use a blower and an electric heater to provide heated ambient air for regeneration. With a purge air usage to only 2% (averaged over the cycle) and an option for zero purge operation, these dryers off er the lowest cost of operation for most applications.

Nano D5 NBP Blower Purge twin tower desiccant air dryers reliably give you:
• advanced PLC controls allow you to monitor the operation of the dryer through an easy to use digital display.
• multiple thermocouples control regeneration and provide constant temperature display.
• secondary heater contactor provides protection against overheating in the event of a primary contactor failure.
• visual alarm lights and step by step diagnostics simplify troubleshooting.
• selectable “Dry Air Cooling” mode lets you choose between maximum performance and maximum energy savings depending on the needs of your application.
• rugged field proven digitally controlled dual acting high performance butterfly valves and stainless steel spring return wafer check valves ensure long operating life and minimum maintenance.
• insulated external electric heaters for efficient regeneration in all operating conditions.
• nano M01 coalescing pre filters and NHT M1 high temperature after filters with high quality hygroscopic desiccant ensure low pressure drop and consistent dew point performance.
• nano understands that every customer and every application is different. That is why we provide a wide range of available options to customize your dryer to your specific needs.

Model(s): NBP 500, NBP 650, NBP 800, NBP 1000, NBP 1250, NBP 1500, NBP 2000, NBP 2500, NBP 3000, NBP 3500, NBP 4000, NBP 5000, NBP 6000, NBP 7000, NBP 8000, NBP 9000, NBP 10000

*Scroll to the right on mobile to see entire chart
   Model
Inlet & Outlet
NPT(F)/FLG(1)
scfm(2)
Nm3/h(2)
recommended
pre Filter(3)
recommended
after Filter(3)
NBP 500
2"
500
850
NF 0700 M01
NHT 0650 M1
NBP 650
2"
650
1105
NF 0700 M01
NHT 0650 M1
NBP 800
3"
800
1,360
NF 1000 M01
NHT 1000 M1
NBP 1000
3"
1,000
1,700
NF 1000 M01
NHT 1000 M1
NBP 1250
3"
1,250
2,125
NF 1250 M01
NHT 1250 M1
NBP 1500
3"
1,500
2,550
NF 1500 M01
NHT 1600 M1
NBP 2000
3"
2,000
3,400
NFZ 2500 M01
NFZ 2500 M1HT
NBP 2500
4"
2,500
4,250
NFZ 2500 M01
NFZ 2500 M1HT
NBP 3000
6"
3,000
5,100
NFZ 3500 M01
NFZ 3500 M1HT
NBP 3500
6"
3,500
5,950
NFZ 3500 M01
NFZ 3500 M1HT
NBP 4000
6"
4,000
6,800
NFZ 4000 M01
NFZ 4000 M1HT
NBP 5000
6"
5,000
8,500
NFZ 5000 M01
NFZ 5000 M1HT
NBP 6000
6"
6,000
10,200
NFZ 6000 M01
NFZ 6000 M1HT
NBP 7000
8"
7,000
11,890
NFZ 7500 M01
NFZ 7500 M1HT
NBP 8000
8"
8,000
13,590
NFZ 8500 M01
NFZ 8500 M1HT
NBP 9000
10"
9,000
15,290
NFZ 10000 M01
NFZ10000 M1HT
NBP 10000
10"
10,000
16,990
NFZ 10000 M01
NFZ 10000 M1HT
(1) 2” and below are NPT(F) threaded. 3” and above are flanged. All units with 3” piping will be ANSI welded pipe and the filter connections will be flanged
(2) at an inlet of 100 psig and 100°F. For all other inlet conditions refer to the correction factors
(3) recommended for all applications


*Scroll to the right on mobile to see entire chart
   Specifications
Standard
Optional
maximum particle size (ISO class) (6)
class 2 (1 micron)
class 1 (0.01 micron)
maximum water content (ISO class) (6)
class 2 (-40°F pdp)
-
design operating pressure range
80 to 150 psig
58 to 250 psig
recommended operating temp range
40 to 100°F
-
design operating temperature range
35 to 120°F
-
power supply requirements
460 VAC / 60 Hz
575V / 60 Hz or 380 VAC / 50 Hz
(6) per ISO 8573.1:2010

➤Click Here for Pressure & Temperature Correction Factors Chart


How It Works

• regeneration circuit is fully insulated for maximum efficiency.

• specifically designed for a long and dependable operating life in harsh industrial environments.

• metal on metal seats for reliable high temperature operation.

• dependable stainless steel spring return check valves provide worry-free operation and minimal maintenance.

• pneumatic actuators ensure precise proportional control and a bubble tight seal.

• stainless steel and Teflon® seats in a reliable and low pressure drop design.

• purge flow is field adjustable with this precision valve with visual setting indication.

• easily adjust the purge flow to match the operating conditions.

• synoptic display with visual dryer operation.

• alarm indication and description.
D5 Blower Purge Desiccant Dryers How It Works
Options & Accessories
Dew Point Monitors
     ○ integral energy saving outlet dew point control & display
     ○ stand alone portable dew point monitor
Filter + bypass options
     ○ three (3) valve block & bypass
Electrical protection upgrades
     ○ NEMA 4 electrical protection
     ○ NEMA 4X electrical protection
     ○ NEMA 7 electrical protection
Other options & upgrades
     ○ low ambient (< 32°F) temperature protection
     ○ visual moisture indicator
     ○ failure to shift alarm
     ○ run time hour meter
     ○ additional pressure gauges (each)
     ○ additional temperature gauges (each)
     ○ CSA approval for Canadian applications
     ○ 400 Volt 3 Phase 50Hz controls
     ○ 575 Volt 3 Phase 60 Hz controls
     ○ tower & hot piping insulation
     ○ NEMA 4 fusible disconnect
     ○ stainless steel control tubing



Nano D5 Series blower purge Air Dryer Dimensions
*Scroll to the right on mobile to see entire chart
Model
A Height (in)
B Width (in)
C Depth (in)
Weight (lbs)
NBP 500
71"
94"
44"
1,800
NBP 650
71"
94"
44"
1,900
NBP 800
93"
95"
60"
5,100
NBP 1000
93"
95"
60"
5,500
NBP 1250
93"
95"
60"
6,000
NBP 1500
93"
95"
60"
6,400
NBP 2000
140"
113"
65"
7,700
NBP 2500
140"
113"
65"
8,300
NBP 3000
156"
115"
71"
10,700
NBP 3500
156"
134"
71"
11,500
NBP 4000
156"
134"
71"
12,600
NBP 5000
167"
134"
87"
13,600
NBP 6000
167"
134"
87"
15,000
NBP 7000
175"
134"
87"
16,000
NBP 8000
200"
144"
88"
17,000
NBP 9000
218"
152"
88"
18,000
NBP 10000
218"
152"
88"
19,000