Nano L1 Series CO2 Removal Dryer Click for Larger View

Call us TODAY at 727-835-0678 or
Toll Free at 800-761-4298

Request A Quote!

Nano L1 Series
CO2 Removal Adsorption Dryer

flow capacity: 1.5 - 120 l/m

nano L1 range of lab gas CO2 free dryers provide clean, dry, CO2 free purge gas for your laboratory at a fraction of the cost of traditional cylinders. Why buy purge gas in a high pressure cylinder when you can generate your own, more easily, reliably and cost effectively using a CO2 dryer? The nano L1 range of lab gas CO2 free air dryers are small, simple and can be wall mounted right in your laboratory. Connect them to your existing compressed air system to deliver a continuous supply of clean, dry and CO2 free purge gas without any of the hassle of traditional cylinders. Ideal for laboratory applications including FTIR purge, TOC purge, NMR, GC flame gas and laser purging, these systems eliminate the interruptions, recalibrations and safety concerns associated with high pressure Oxygen and Nitrogen cylinders. Developed with the laboratory in mind, nano L1 CO2 removal dryers require no bench space and the innovative exhaust silencing system ensures incredibly quiet operation.
Using proven pressure swing adsorption (PSA) technology, the units feature automatic regeneration and advanced purification cartridges with integral post filtration providing totally clean, dry air with a CO2 level of less than 1 ppm. It’s time to bring your purge gas supply into the 21st century. There is no better solution for your laboratory purge gas needs.

Service guidelines - desiccant cartridges should be changed every 2 years | valves should be changed every 4 years | refer to user guide for full service details.
Model(s): NDC 015, NDC 050, NDC 140, NDC 300, NDC 600, NDC 900, NDC 1200

*Scroll to the right on mobile to see entire chart
   Model
Service Kit
part no.
Inlet & Outlet
NPT(f)
Inlet Air Flow 1
Outlet Gas Flow1
ft3/hr
L/min
ft3/hr
L/min
NDC 015
NDK 011
" PTC
5.3
2.5
3.2
1.5
NDC 050
NDK 011
" PTC
17.6
8.3
10.6
5.0
NDC 140
NDK 021
" PTC
53
25
32
15
NDC 300
NDK 031
" PTC
106
50
64
30
NDC 600
NDK 051
½" PTC
212
100
127
60
NDC 900
NDK 061
1"
318
150
191
90
NDC 1200
NDK 071
1"
424
200
254
120
(1) at inlet conditions of 100 psig and 68°F and up to 375 ppm CO2. For all other conditions contact sales@mdisales.com for sizing assistance.

*Scroll to the right on mobile to see entire chart
   Specifications
design operating pressure range 58 to 174 psig
recommended operating temperature range 59 to 68°F
power supply requirements 50 or 60 Hz, 100 to 240 VAC
maximum noise level (during depressurization) 60 dBa
manufacturing quality standards ISO 9001.2015 & CE
warranty 1 year
Outlet Gas Quality Standard Optional
maximum CO2 content 1 ppm -
maximum pressure dew point -94°F -
maximum particulate size 1 micron 0.01 micron 2
maximum oil content - 0.0003 ppm 3
(2) requires addition of a nano M01 particulate after filter at the outlet
(3) requires addition of a nano M01 coalescing pre filter and an AC activated carbon filter at the inlet. Recommended for compressed air systems using an oil flooded compressor
(4) NDC 015 to NDC 600 have push to connect fittings on the inlet and outlet. All other models have NPT threaded connections
(5) NDC 900 to NDC 1200 - noise level is 80 dBa


➤Click Here for Pressure & Temperature Correction Factors

No Options Available At This Time



Nano L1 Series Dimensions
*Scroll to the right on mobile to see entire chart
Model
A (in)
B (in)
C (in)
Weight (lbs)
NDC 015
17"
9"
10"
19.9
NDC 050
17"
9"
10"
19.9
NDC 140
17"
9"
10"
19.9
NDC 300
25"
9"
10"
29.8
NDC 300
25"
9"
10"
29.8
NDC 600
43"
9"
13"
56.2
NDC 900
29.3"
16.8"
11.1"
103.6
NDC 1200
29.3"
16.8"
11.1"
103.6